Software Installation; Software Operation - Velleman DVR4MQAEE User Manual

c. Key Lock
1. Key Lock On:
- Press "MENU" + "ENTER" buttons to key lock.
- Auto key lock: refer to "9.k. Advance Menu_System".
2. Key Lock Off:
Press any key (except "SHIFT" and "POWER" buttons) and key in the password to exit Key Lock mode.
3. Password:
As to the password setting, refer to "9.k. Advance Menu_System".
d. The N/P System
1. Press "POWER" button to shutdown and press "POWER" + "►" to switch to PAL system (press till the monitor
shows the video image of the DVR).
2. Press "POWER" button to shutdown and press "POWER" + "◄" to switch to NTSC system (press till the monitor
shows the video image of the DVR).
e. Licensed Software AP

SOFTWARE INSTALLATION

1. Put the CD into a driver. It will start to install the application programme.
2. The PC will auto run the setup file.
3. After setup, you will see "

SOFTWARE OPERATION

1. Connect DVR with the PC via RJ45 network line.
2. LAN Setting:
The default DVR IP is "192.168.1.10", and default "username" and "password" are both "admin". Set PC IP
address as "IP: 192.168.1.XXX (1~255, except 10)" (in order to let the PC and DVR under the same domain).
3. Click twice to enter login page. Key in 192.168.1.10, admin, admin into the login page. After connecting the
DVR with local LAN, modify the network setting in the DVR or in the system configuration of the licensed software
AP.
4. Network Type ~ Static IP:
Set the network information in the DVR menu (see "9.l. Advance Menu_Network).
Network Type ~ Dynamic IP (DHCP and PPPoE):
Set the Network information in System Config of the licensed software AP.
For detailed DHCP and PPPoE setting, please refer to "10.f. DHCP" and "10.f. PPPoE".
5. After setting up the network information, click
Key in "Username", "Password" and "IP" (Static IP) or "Host name" (Dynamic IP). Click the green button to
connect.
6. LOGIN AP Icon Explanation.
Address Book: press this button to add a new
IP into the IP Address Book or choose a preset
IP address to access the Video Server.
Player: press this button to access and play the
recorded files saved in your PC.
DVR4MQAEE_v5
" on the desktop.
twice to enter login page.
- 23 -
Search: search the available DVR IP address
in local area network and modify the network
setting of the DVR.
Copy: press this button to copy all the
software installation files so you can keep all
the settings of video web server for next
software installation on other PC.
VELLEMAN