JVC GC-XA1 Detailed User Manual page 39

Note
• The possible reasons for "Connecting Failed" could be (1) wrong password ; (2) you are not
in the wireless network area of the AP. (3) the camera does not support the type of encryption
used on the AP. This model only supports WEP/WPA/WPA2 personal type of encryption, but
not up to enterprise level (4) your network requires PPPoE account/password information.
• This camera only supports the AP(SSID) named in English/number/symbols (ASCII
characters).
• You can only enter text in English, regardless of the OSD language.
• Some AP routers do not allow you to connect to the network (e.g. firewall).
• The camera cannot connect to the network while it is connected to HDTV via the cable, or
vice versa.
• It may take time to scan and connect to the AP/network or to upload. The stream speed is
affected by the Internet connection speed or other factors.
• Please be sure the battery is fully charged before connecting to the network.
• Ustream may not be allowed to access in certain regions or networks.
39
EN