Heat Operation; Select Operation Mode - Haier 10518526 Operation Manual

Operation

Heat Operation

(1) Unit start
Press ON/OFF button, unit starts.
Previous operation status appears on display. (Not Timer setting)

(2) Select operation mode

Press MODE button. For each press, operation
mode changes as follows:
HEAT
COOL DRY
Unit will run in operation mode displayed on LCD.
Stop display at your desired mode.
(3) Select temp. setting
Press TEMP button.
Every time the button is pressed, temp. setting increases 1
Every time the button is pressed, temp. setting decreases 1
Unit will start running to reach the temp. setting on LCD.
(4) Fan speed selection
Press FAN button. For each press, fan speed changes
as follows:
Remote controller:
AUTO
IN HEAT mode, warm air will blow out after a short period of the time due to cold-draft
prevention function.
(5)
Unit stop
Press ON/OFF button, the unit stops.
Hints
Remote controller can memorize each operation status. When starting it next time,
just press ON/OFF button and unit will run in previous status.
HI MED
7
o
C
o
C
LO
ON/OFF TEMP
3
1
3
5
MODE
SET
2
FAN
TIMER
4
SWING CLOCK
HEALTH POWER/SOFT
LOCK
RESET