Heat Operation - Haier V Series Service Manual

Operation

Heat Operation

Remote controller
PURIFY
FRESH
HUMIDITY
POWER/SOFT
TEMP./HUMIDITY DISPLAY
HSU-18,22C03/V(ZXF)
1. Unit start
Press ON/OFF on the remote controller, unit starts.
2.Select operation mode
Press MODE button. For each press, operation mode
changes as follows:
Remote controller:
AUTO
Then Select HEAT operation
3.Select temp.setting
Press TEMP. button
Every time the button is pressed, temp.setting
o
increase 1 C,if kept depressed, it will increase
rapidly
Every time the button is pressed, temp.setting
o
decrease 1 C,if kept depressed, it will decrease
rapidly
Select a desired temperature.
4.Fan speed selection
Press FAN button. For each press, fan speed changes as
follows:
Remote controller:
Air conditioner is running under displayed fan speed
IN HEAT mode, warm air will blow out after a short period
of the time due to cold-draft prevention function.
When FAN is set to AUTO, the air conditioner
automatically adjusts the fan speed according to room
temperature.
5.Unit stop
Press ON/OFF button, the unit stops.
35
: http://splitoff.ru/tehn-doc.html
System Configuration
COOL DRY FAN
LOW
MED HI
Domestic Air Conditioner
HEAT
AUTO