Rear Panel - Manley Neo-Classic 300B Owner's Manual

A
B
A) MAINS FUSE - Depending on your local power outlet's voltage, replace with 3A SLO-
BLO fuse (120 V) or 1.5A SLO-BLO fuse (230V).
B) IEC MAINS SOCKET - Standard IEC mains socket (120/240 VAC as indicated)
C) MAIN OUTPUT - Main left and right outputs driven by 300B's. Connect these to your
power amplifier inputs when the amps are off.
D) SUBWOOFER OUTPUT - Same as Main Output.
E) RECORD OUTPUT - Set at input line stage level. These normally are connected to a
tape recorder's inputs. The signal is "picked off" the input selector and before the volume
control. It is a good idea to disconnect any wires connected to these jacks when not recording
to prevent extra loading andcable capacitance from affecting the best possible performance.
F) TUNER INPUT - Connect your tuner outputs here.
G) AUX INPUT - This is where you plug your Aux in - no, not your cattle. "Aux" stands for
Auxilliary and basically means "extra", so this is just an extra input for any other source that
we didn't label or you have two of. Any of the input jacks can be used with any Hi-Fi RCA
outputs, as they are electrically identical and only differ in how we labeled them.
H) VIDEO INPUT - Audio actually, from a DVD, Laserdisk, TV, VHS, or BetaMax (or, um,
whatever's current...) player's audio output.
I) CD INPUT - Plug in your audio outputs from your CD player or D/A Converter here.
J) TAPE INPUT - Tape machine outputs can be connected here. Be very careful - If the
tape machine inputs are connected to the preamplifier's RECORD OUTs and the preamp is
switched to TAPE and the tape machine is set to monitor "INPUT" or you start to record -
beware the dreaded squeal and howl of feedback! One quick "cure" is to not select "TAPE"
on the rotary input selector if these other conditions are met.

REAR PANEL

8
F
C
D
E
H
I
G
J