DOcKinG yOur ipod, iphone Or ipad Device
Your JBL OnBeat Air includes two adapter clips: one for an iPod touch/
iPod classic/iPhone device and another for an iPad device. (NOTE: iPod nano
models do not require an adapter clip.) The adapters allow you to dock units with
or without third-party skins attached. Attach the appropriate adapter clip to the
JBL OnBeat Air, as shown in the next column.
ipod touch/iphone
Bend Clip
Slightly
Place your iPod/iPhone/iPad device on the docking connector. Make sure the
device is inserted all the way onto the connector. Press the top of the iPod/iPhone/
iPad device all the way back into the adapter clip or against the dock to secure it
in the dock.
8
ipad
Locking
Hole
Insert Pin Into
Locking Hole
Bend Clip
Slightly
for ipad 1
for ipad 2
for ipad 2
with smart
cover
rOtatinG tHe DOcK
When an iPod or iPhone device is docked in the JBL OnBeat Air, you can rotate
the dock to the landscape mode.
IMPORTANT: You cannot rotate the dock when an iPad device is docked.
To rotate the dock to the landscape mode, turn it 90 degrees counter-clockwise.
To rotate it back to the portrait mode, turn it 90 degrees clockwise. The dock will
hold in place at the portrait and landscape positions.
portrait Mode
landscape Mode