How To Use - JBL OnBeat air Owner's Manual

7. Use the drop-down list to select your wireless network's SSID and enter your
network's WEP Key or WPA Passphrase security information. When you're
finished, click the screen's Connect button.
8. When the JBL OnBeat Air has successfully joined your network, the Status
LED will turn solid white. If it failed to join the network, the LED will flash Amber.
Repeat steps 4 – 7 or check your Wi-Fi network if the LED continues to flash
amber.
9. Change your computer's or device's network connection back to your home
Wi-Fi network.
Your JBL OnBeat Air will now remember your Wi-Fi network router's security
information and will always automatically connect to your Wi-Fi network as long
as your Wi-Fi router is on and as long as yourJBL OnBeat Air is either on or in the
sleep mode.
If your JBL OnBeat Air ever becomes disconnected from your Wi-Fi network, hold
the unit's Connect button for three seconds and repeat Steps 4 – 7.
IMPORTANT: If your Wi-Fi network requires that you manually configure your JBL
OnBeat Air's Wi-Fi settings, see Manually Configure the JBL OnBeat Air's Wi-Fi
Settings, on page 10.
6
usinG yOur JBl OnBeat air
To turn the JBL OnBeat Air on, press the Power button on the unit. The
unit's status LED will flash green when the system is booting up. To turn the
JBL OnBeat Air off, press the Power button on the unit again. The status LED
will turn off. While in the off mode, the AirPlay function is turned off to minimize
power consumption. NOTE: The JBL OnBeat Air will not automatically enter the
off mode.
To place the JBL OnBeat Air into the sleep mode while an iPod, iPhone or iPad
device is docked, hold down the Play/Pause button on the remote for two seconds.
The status LED will glow amber when the unit is in the sleep mode. To turn the JBL
OnBeat Air from sleep to on, press any button on the unit or the remote control.
The JBL OnBeat Air will automatically enter the sleep mode whenever no
control buttons have been pressed and no audio signal has been present for 10
minutes.
Power
Button
Volume
Buttons