Thecus N2310 series User Manual page 55

-Fill out all the necessary details and choose your parameters
Add Rsync Backup Task
Item
Task Name
Backup Type
Sync Type
Compress
Backup NAS Config
Resume Partial File
Handle Sparse File
Keep ACL Setting
Log Location
Speed Limit
Timeout Limit
Enable Schedule
After the required fields are filled and the parameters are setup, click 'Finish" to complete. The data
guard task will appear in the list as shown below.
Description
This is how this task will appear in the task list.
Real time:
It will backup folders/files from source to target on the fly. On the other hand, any
changes from the source will back up to the target right away.
Schedule:
The task will start only according to the schedule.
Sync mode:
Makes your source match your target completely; deleting and adding files on your
target as they are deleted and added on your source.
Incremental Mode :
Makes your source match your target and keep all old files; adding files on your target
as they are added on your source, but NOT deleting files on your target as they are de-
leted on your source.
With this option, compress the file data as it is sent to the destination machine, which
reduces the amount of data being transmitted – something that is useful over a slow
connection.
Enabling this will back up the source unit system configurations to the designed path
on the target system.
Try to handle sparse file efficiently so they take up less space on the destination.
It will backup not just data itself but also ACL configuration with associated folders/
files.
Choose the folder to save the log details while the task is executed.
Input the bandwidth control for data backup operation.
Setup the timeout when trying to build up a connection in between the source and
the target system.
If backup is set as "Schedule", please input the related period and time.
Chapter 3: System Administration
49