Thecus N2310 series User Manual page 39

• Samba Configuration
On the Folder screen, press the Samba button and the Samba Configuration screen appears. This
screen allows you to setup samba configuration for associated folder. After entering the information,
press Apply to activate input settings.
Samba Configuration
Item Description
RAID ID RAID volume where the new folder will reside.
Folder Name Enter the name of the folder.
Public Admit or deny public access to this folder.
Press Apply to create the folder.
Apply
• Folder and sub-folders Access Control List (ACL)
On the Folder screen, press the ACL button, and the ACL setting screen appears. This screen allows
you to configure access to the specific folder and sub-folders for users and groups. Select a user or
a group from the left hand column and then choose Deny, Read Only, or Writable to configure their
access level. Press the Apply button to confirm your settings.
Chapter 3: System Administration
33