Chapter 2: Hardware Installation - Thecus N2310 series User Manual

§

Chapter 2: Hardware Installation

221 Overview
Your Thecus IP storage is designed for easy installation. To help you get started, the following chapter
will help you quickly get your Thecus IP storage up and running. Please read it carefully to prevent
damaging your unit during installation.
222 Before You Begin
Before you begin, be sure to take the following precautions:
1. Read and understand the Safety Warnings outlined in the beginning of the manual.
2. If possible, wear an anti-static wrist strap during installation to prevent static discharge from
damaging the sensitive electronic components on the Thecus IP storage.
3. Be careful not to use magnetized screwdrivers around the Thecus IP storage's electronic com-
ponents.
223 Cable Connections
To connect the Thecus IP storage product to your network, follow the steps below:
1. Connect an Ethernet cable from your network to the LAN port on the back panel of the
Thecus IP storage.
2. Connect the provided power cord into the universal power socket on the back panel. Plug
the other end of the cord into a surge protector socket.
Chapter 2: Hardware Installation
4
S N2310 LAN port
S N2310 power socket
Thecus IP storage's electronic com- 's electronic com- s electronic com- electronic com-