Ui Login Function; Etworking - Thecus N2310 series User Manual

3.3.13

UI Login Function

Adjusts UI Login Configuration settings, you can enable/disable the Web Disk, Photo Server and
modules functions, according to your needs.
3.3.14 Networking
From the System Management category, choose Networking, and the Networking Configuration
screen appears. This screen displays the network parameters of the global setting and available
network connection. You may change any of these items and press Apply to confirm your settings.
See a description of each item in the following table:
Network Configuration (Global parameter)
Item
Host name
Domain name
WINS Server
DNS Mode
DNS Server 1,2,3
Network Configuration (NIC port)
Link speed
Link status
MAC address
Jumbo Frame Support
IPv4/IPv6
Mode
IP
Netmask/Prefix Length
Description
Host name that identifies the Thecus IP storage on the network.
Specifies the domain name of Thecus IP storage.
To set a server name for NetBIOS
Select the DNS server is coming from DHCP server or manual input. A total of 3 DNS
servers can be input. If the DNS setting is chosen from DHCP server, then it will refer to
WAN/LAN1 port.
Domain Name Service (DNS) server IP address.
Display associated NIC port link speed.
Display associated NIC port link status.
MAC address of the network interface.
Enable or disable Jumbo Frame Support of associate interface on your Thecus IP storage.
Click to enable IPv4/IPv6 for TCP/IP. The default is IPv4 enabled.
It can choose a static IP or Dynamic IP.
IP address of associate NIC interface.
Input netmask for IPv4 and Prefix length for IPv6.
computer.
Chapter 3: System Administration
17