Please read and follow these instructions carefully. By doing so, you and your guests will enjoy your SOLIS X 100. Please keep these instructions in a safe place. If you are not sure about anything or would like to receive more information, please ask your local dealer or us.
SOLIS X 100 USER’S MANUAL Legend: SOLIS X 100 8a Grinder adjusting lever Explanations for the indicators 9 Filling opening with cover for 1 Removable water reservoir pre-ground coffee Appliance is ready for use with cover 10 Service door flashes...
USER’S MANUAL SOLIS X 100 1.0 Safety Instructions Repairs/Maintenance: In the case of a defect, the appliance must only be opened and repaired Please strictly observe the following safety precautions for your own by an authorized technician. This also applies to safety and the safety of others.
SOLIS X 100 USER’S MANUAL Position of the appliance: Place the appliance Conditions of use: This espresso machine has on a stable, level surface. The surface must not been manufactured for household duty only. Do be warm or hot. Choose a position that is out of not use the machine for any other purpose.
USER’S MANUAL SOLIS X 100 The grinder is set to the middle position at the Cold /Frost: The appliance must be protected factory. against frost, therefore do not leave it overnight Note: Only pure coffee beans must be used in a car in winter, otherwise there is danger of and no types of coffee with a caramelized or frost damage.
SOLIS X 100 USER’S MANUAL 3.5 Venting the appliance Note: The SOLIS X 100 is equipped with auto- matic pre-brewing: The ground coffee is first Hold a suitable container underneath the wet, the flow of water is briefly stopped and then the actual brewing operation starts.
USER’S MANUAL SOLIS X 100 After the coffee is delivered the display 5.0 Making hot water automatically returns to the factory settings. For tea, soups etc. Note: You can also reprogram the coffee quanti- 5.1 When the appliance is ready for use,...
(from the start of grinding) Your Solis X 100 is already programmed with the ideal settings at the factory. You and is only released at the end. have the option to set the appliance to your own individual tastes.
USER’S MANUAL SOLIS X 100 7.3 Programming the water hardness 7.4 Standard programming by the manufacturer The appliance is pre-programmed for an aver- The appliance is programmed by the factory on age value of water hardness of 3, which is the standard settings which normally ensure perfect correct setting for normal water conditions.
9.0 Cleaning and care Always keep your SOLIS X 100 clean. You will be rewarded by top quality coffee and in addition it extends the working life of your appliance. 9.1 Daily and weekly cleaning...
Page 11
USER’S MANUAL SOLIS X 100 Important: Before cleaning the machine, Proceed as follows: always switch off and unplug the appliance. a) Set the coffee bean container to the powder coffee position , the ground coffee quantity indicator (21a) flashes. The water container (1), the drip tray (6), the cup...
Page 12
SOLIS X 100 USER’S MANUAL f) Replace the brewing unit after cleaning and – Turn the integrated handle, clockwise, drying it. Place the brewing unit in the until the end. Both filters are accessible guide way (round metal bar) and check now.
Page 13
Remove the brewing unit, clean and replace. Close the door and switch on the appliance (in accordance with The SOLIS X 100 features a cleaning program intended as a supplement to the normal point 9.3). daily/weekly cleaning procedure. It ensures...
Please observe point 10.0 before running the integrated descaling program. 10.0 Descaling Note: The descaling program including The SOLIS X 100 features an automatic descaling program that ensures rinsing takes about 40 minutes and must easy and effective descaling. not be interrupted.
Page 15
USER’S MANUAL SOLIS X 100 e) Press and hold descaling button (23), i) Rinsing with fresh water is now done press and hold selection button (19) at automatically via the brewing unit. As soon the same time until the programm start.
Prior to returning your machine to the service center for repair, please study the following points carefully. Very often the problem can be solved Repairs may only be carried out by the SOLIS customer service or by SOLIS and inconvenience avoided.
SOLIS Service Center or an authorized Solis service dealer will prolong the life of your machine and ensure top quality coffee. – Always use fresh coffee and darker roasts. For example the SOLIS blends that For repairs, please contact: are especially suitable for use with espresso machines.
Tel. 0848 804 884, Fax. 0848 804 890 E-mail: info@solis.ch, Internet: www.solis.ch In all other countries, in which SOLIS products are distributed, also via the Descaling agent SOLIS SOLIPOL trade or directly from the corresponding SOLIS subsidiaries/agents. Please refer to Especially designed for the careful descaling the guarantee card for the addresses of the SOLIS subsidiaries and agents.
USER’S MANUAL SOLIS X 100 15.0 Technical data Accessories: Cleaning brush, Measuring spoon Materials used: Housing ABS plastic Safety Certification/Standards: Appliance Data: – CE and international standards marks. Voltage: 230 V (USA: 115V) Power consumption: 1150 watts This product complies with the EMI regulations of...
Page 20
SOLIS-Gesellschaften und Kundendienstzentralen: Sociétés et centres de service après-vente SOLIS: Società e centri di servizio clientela SOLIS: SOLIS Subsidiaries and Service Centres: Schweiz / Suisse / Svizzera / Switzerland Deutschland /Allemagne / Germania / Germany SOLIS AG SOLIS DEUTSCHLAND GmbH Solis-Haus Tel.