Buzzer; Reduced Performance - Seastar Solutions Optimus 360 Operation Manual

warnInG
58

10.3 Buzzer

The buzzer is used to indicate a system fault. There are two different
signals:
1. Continuously on. This indicates a danger fault. A danger fault is a
critical system fault which will result in limited or no steering
performance and requires immediate action. See Section 10.1.1.
2. Alternating on and off. This indicates a warning fault. A warning is
a non-critical system fault which may cause the steering speed to
be reduced. See Section 10.1.2.
all signals require immediate attention.
When the buzzer sounds, a screen will appear on the CANtrak
indicating the cause for the alarm. The screen will also display a
Mute button which may be used to silence the alarm.

10.4 Reduced Performance

Under certain fault conditions the steering response will slow down.
A typical cause might be a very low battery. When this happens
the CANtrak will advise the operator of the condition, indicate the
reason, and supply instructions.
proceed wIth cautIon untIL the fauLt IS corrected and
normaL operatIon returnS.
© 2013 SeaStar Solutions Optimus 360 Joystick Control System, Rev. C