Warning Fault Handling - Seastar Solutions Optimus 360 Operation Manual

10.2.3
Will appear if multiple
faults are active to allow
user to scroll through
54

Warning Fault Handling

A warning is a non-critical system fault which may cause the steering
speed to be reduced.
During a warning fault, the CANtrak will display the same information
as with a danger fault but WARNING will appear across the top of the
screen and the buzzer will sound intermittently (until muted). See the
figure below.
Figure 10-4. Warning Fault screen layout.
The user may choose to exit the Warning screen and return to the All
Helms Active screen by pressing the exit button, in which case the
system will flash a warning icon on the run screen as shown on the
next page. This icon will remain in place until the fault is repaired.
If the system recovers from the fault (e.g. if a battery runs low and
is subsequently charged), the warning screen will disappear and the
system will automatically resume normal operation.
In rare cases there may be multiple Warning faults at the same time.
You can view a list of all active warning faults by selecting Active
Warnings from the Diagnostics (DIAG) screen.
© 2013 SeaStar Solutions
Active Fault
Description Zone
System Status Zone
Fault Handling
Instructions Zone
User may exit the
Warning screen and
return to run screen
Optimus 360 Joystick Control System, Rev. C