System Fault Handling - Example - Seastar Solutions Optimus 360 Operation Manual

10.2.4
This area shows the
active faults
Describes what system has
done to react to fault
Tells the User how
to proceed
56
System Fault Handling – Example
The following is an example of how the system would respond to the
warning fault hazard of a low port engine battery.
The CANtrak display will enter the warning screen mode and pulse the
system warning buzzer. The three warning screen zones will appear
as shown below.
Figure 10-6. Sample warning fault.
In this case, the fault handling instruction zone tells the user to power
off any non-essential devices and to seek technical support. The
system status zone informs the user that the system has switched to
the starboard battery and reduced the steering speed.
The vessel should be returned to port immediately for repair.
© 2013 SeaStar Solutions
Active Fault
Description Zone
System Status Zone
Fault Handling
Instructions Zone
Optimus 360 Joystick Control System, Rev. C