Encryption Tab - Draytek VigorPlug 200AV User Manual

3 . 2 E n c r y p t i o
3 . 2 E n c r y p t i o
This Encryption window is used to set or change the network password on a remote
device identified by its DAK password.
Network Key to Set
Remote Device Access
Key
Set
Push Button
n T a b
n T a b
Network Password - It is used for the remote user trying to
connect with VigorPlug 200AV. Default is "HomePlugAV"
but not shown here. The user can change the Password
through this page. Same password can group together in the
same Powerline circuit.
Set Encryption for Remote Device - Check this box for
setting the Network Password for the remote device.
DAK Password - It means Device Access Key. Each device
has its own password number located in the rear of the device.
If you want to control VigorPlug 200AV in remote side
through this page, you can enter the DAK password to this
column.
Save the settings. If the DAK password field is left blank,
clicking the Set button will only set local device with the
entered password in Network Password column.
You can find the Secure button on the device to reach the
purpose of encrypting for your data. However, you can do the
same thing in this page. There are three actions provided here
for you to choose.
Action - Provides a choice of three actions. Simple Connect
allows you to use the default password to link. NMK
(Network Management Key) Randomize can auto generate
11