Dismantling The Rear Wheel - Ghost Bike User Manual

13.1.3

Dismantling the rear wheel

1. On the rear wheel, switch to the smallest sprocket of the sprocket assembly
(see section 8.4.1.2, Switching to a smaller chainring/sprocket).
2. Operate the rear brake until the rear wheel comes to a complete stop.
3. Open the lever of your quick-release or thru axle according to section 8.6.1.1, Opening the quick-re-
lease axle or 8.6.2.1, Opening the thru axle.
4. Open your rim brake in accordance with section 13.1.5, Opening and closing the brakes.
5. Raise the bike at the rear end and push the gear shift mechanism to the rear. In this position, push the
rear wheel with alight pressure towards the opening in the frame.
GHOST-bikeS
87