Opening And Closing The Thru Axle On The Wheel; Opening The Thru Axle - Ghost Bike User Manual

– Open the quick-release lever.
– Loosen the nut slightly in an anticlockwise direction.
– Close the quick-release lever.
8. Check the tightness of the wheels as described in section 7.1.1, Checking the position and tight fit.
8.6.2

Opening and closing the thru axle on the wheel

1. Axle
2. Thread
3. Lever

8.6.2.1 Opening the thru axle

1. Press the eccentrically pivoted lever away from the hub. The lever with the axle can now rotate.
2. Turn the lever with axle in an anti-clockwise direction until the axle is completely released from the op-
posite thread in the dropout.
3. Remove the axle from the hub. The wheel is now free.
72