Closing The Quick-Release Axle On The Saddle Post Clamping - Ghost Bike User Manual

2. If the saddle post cannot be moved in this position, turn the knurled nut a little in an anticlockwise
direction (as viewed from the left side).

8.6.3.2 Closing the quick-release axle on the saddle post clamping

NOTE :
Connect the saddle post clamping only if the saddle post is located in the saddle tube. Closing without an
inserted saddle post may cause irreparable damage to the frame.
1. Check the tightness of the clamp. The clamp must sit flush on the saddle tube.
2. Close the quick-release lever.
3. Carry out a check of the saddle post clamping in accordance with section 7.2, Inspecting the saddle
and saddle post.
GHOST-bikeS
75