Table of Contents
Advertisement
DVG-5112S User's Manual
3-1-3 LAN Settings
SETUP → LAN Setup
Interface Mode: Select the VoIP TA serving as a Router with NAT or Bridge between WAN port and LAN
port without NAT.
Note: It is still accessible if LAN Interface Mode is Bridge.
LAN Port Address: Enter the LAN IP address of the VoIP TA. It is also the default gateway for DHCP
clients.
Subnet Make: Enter the subnet mask for DHCP clients.
Enable DHCP Server: This variable is to assign the IP address for the devices connected to LAN port of
the VoIP TA.
IP Pool Starting Address: Enter the starting IP address for the DHCP server's IP assignment.
IP Pool Ending Address: Enter the ending IP address for the DHCP server's IP assignment.
D-Link Systems, Inc.
SETUP
29
Advertisement
Table of Contents
