Ip Configuration Settings-Set The Ip Configuration Of The Wan Port - D-Link DVG-5112S User Manual

Voip telephone adapter
Hide thumbs Also See for DVG-5112S:
Table of Contents

Advertisement

DVG-5112S User's Manual
4-2 IP Configuration Settings—Set the IP Configuration of the
WAN Port
Static IP Settings
Note: Complete static IP settings should include a static IP (option 1 under 114), IP address (111), Subnet
Mask (112), and Default Gateway (113). Please contact your Internet Service Provider (ISP) if you have
any question.
Function
Select a Static IP
IP address Settings
Subnet Mask Settings
Default Gateway Settings
Save Settings and Restart
Dynamic IP (DHCP) Settings
After entering IVR mode, dial 114.
When voice prompt plays "Enter value", dial 2 (to select DHCP).
Saving settings –press 509 (Save Settings). Please restart the system. After the system is restarted, press
101 to check whether or not the IP address was retained.
Note: If the system does not play back the IP address, this indicates that the VoIP Telephone Adapter
failed to communicate with a DHCP server. Please check with your DHCP server or ISP.
ADSL PPPoE Settings
Note: Complete PPPoE settings should include: Select PPPoE (option 3 of 114), PPPoE account (121) and
PPPoE password (122).
Please contact your local Internet Service Provider (ISP) if you have any questions.
D-Link Systems, Inc.
Command
After entering IVR mode, dial 114.
When voice prompt plays "Enter value", dial 1 (to select static IP)
After entering IVR mode, dial 111. When voice prompt plays "Enter value",
enter your IP address followed by "#".
Example: If the IP address is 192.168.1.200, dial 192*168*1*200#.
After entering IVR mode, dial 112. When voice prompt plays "Enter value",
enter your subnet mask followed by "#".
Example: If the subnet mask value is 255.255.255.0, dial 255*255*255*0#.
After entering IVR mode, dial 113. When voice prompt plays "Enter value",
enter your default gateway's IP address followed by "#".
Example: If the default gateway is 192.168.1.254, dial 192*168*1*254#.
To save settings, dial 509 (Save Settings). The system will save the current
settings. Please restart the system. Wait for about 40 seconds for the
system to restart, and then enter 101 to check whether the IP address was
retained. If the system does not play back the IP address after dialing 101,
this indicates that the VoIP Telephone Adapter currently is not connected to
the Internet. Please check and make sure the cable connections, account
numbers, and passwords are correct.
VoIP Telephone Adapter Configuration-IVR
91

Advertisement

Table of Contents
loading

Table of Contents