Copy Firmware And Settings To Another System; Copy Firmware To Another System - Topfield TF 5810 PVRt User Manual

6.4 Copy Firmware and Settings to Another System

6.4.1 Copy Firmware to Another System

6.4 Copy Firmware and Settings to Another System 75
If there is no update available, you will see a message telling
you that there is nothing available. You will also see the same
message if the firmware you are using is the same version as
the one being broadcast.
If you have more than one TF 5810 PVRt, you can copy a
firmware or Settings between them by connecting a RS-232
cable .
To copy a firmware from one to another, perform the following
steps:
1. Turn off the target digital receiver.
2. Plug one end of a RS-232 cable (9 pin D-sub cable) into the
RS-232 port on the digital receiver, and the other end into
the matching port on the other digital receiver.
3. Turn on the source digital receiver if not already on.
4. Press the MENU button to display the PVR's main menu,
and then select Installation and Transfer firmware. On the
The update may take ten to fif-
teen minutes to download, and
your PVR will then restart itself.
The new firmware version will
be shown in the system menus
afterwards.