Topfield TF 5810 PVRt User Manual page 75

fifth and a third of the duration of a programme to transfer it
from the PVR using the USB connection.
Before starting Altair, ensure that the PVR has been connected
to your computer, and that you have installed the drivers, as
we described above. Start Altair from the Start menu, and you
should see a screen similar to this.
The left hand panel shows files and folders that are on your
PVR, while the right hand one shows files and folders that are
on your computer. If you don't see anything on the left hand
side, Altair has not been able to connect to the PVR, and you
should check that it is turned on and that the software was
installed correctly.
Altair works a little like the old file transfer programmes people
used to use; you can open a folder by double clicking on it, and
move up a level by clicking on the top icon in the list. At the
top of each panel, you'll see buttons to move up a folder, and to
change the view, so you can see icons, file details or just names.
The button marked with a red X deletes the file that's selected
in that panel, and the blank folder allows you to create a new
folder.
5.2 Connecting the PVR to your PC 67