Topfield TF 5810 PVRt User Manual page 23

and bottom; select Center Extract to see a picture that fills the
whole screen, with some of the side information lost. And, if
you set TV Aspect Ratio option to 16:9 and select Full, then
the non-widescreen picture will appear with full screen; select
Center to see a picture in the original ratio with balck bars left
and right.
You can cycle through the different display size options by
pressing the 0 button on the remote control while watching a
programme; a message will appear in the top right of the screen
telling you which option has been selected, and the settings in
this menu will also change.
The Sound mode allows you to select stereo, mono, left or right
channels; you should normally leave this set to Stereo.
The digital receiver supports various video resolutions from
576 to 1080. In general a resolution of 720 or more is considered
high definition. The higher the resolution is, the better quality
you can enjoy. However, if your television set does not sup-
port high definition, you cannot enjoy high definition quality
picture.
Set the HDMI Output option as you desire. The available
values for this option are changed according to the TV Type
option.
If you set this option to 576P, the digital receiver will present
even high definition programmes in resolution of 576. On the
contrary, if you set it to 1080I, the digital receiver will present
even standard definition programmes in resolution of 1080.
You can enjoy only standard definition video with the following
connectors:
• Composite video connector (VIDEO)
• S-Video connector (S-VIDEO)
• SCART connector (TV)
1.5 Switching on for the first time 15