Enter Bios Setup; Main Menu - Foxconn 45CMX User Manual

enter bIoS Setup

The BIOS is the communication bridge between hardware and software, correctly setting up the
BIOS parameters is critical to maintain optimal system performance. Power on the computer,
when the message "Press TAb to show PoST screen, Del to enter SeTUP, eSC to enter
boot Menu" appears at the bottom of the screen, you can press <Del> key to enter SETUP.
!
We do not suggest that you change the default values in the BIOS Setup, and we shall
not be responsible for any damage which resulted from the change you made.

Main Menu

The main menu allows you to select from a list of setup functions together with two exit choices.
Use the arrow keys to select a specific item and press <Enter> to go to the submenu.
Each item in the main menu is explained below:
► Standard CM�S Features ► Standard CM�S Features
► Fox Central Control Unit
► Advanced BI�S Features
► Advanced Chipset Features
► Integrated Peripherals
► Power Management Setup
Esc : Quit
F10 : Save & Exit Setup
► Standard CMOS Features
It displays the basic system configuration, such as BI�S ID, system date, time and floppy
drive. They all can be set up through this menu.
► Fox Central Control Unit
Some special proprietary features (such as overclocking) can be set up through this menu.
► Advanced BIOS Features
The advanced system features can be set up through this menu.
► Advanced Chipset Features
The values for the chipset can be changed through this menu, and the system
performance can be optimi�ed.
► Integrated Peripherals
All onboard peripherals can be set up through this menu. There are IDE devices, Super I/O
devices such as Serial I/O, Parallel port and other USB...etc.
Phoenix - AwardBIOS CMOS Setup Utility
► PC �ealth Status
Load �ptimi��ed Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit �ithout Saving
↑↓→←
Time, Date, Hard Disk Type...
20
: Select Item