Table of Contents
Advertisement
1.4 WEARING YOUR TRANSMITTER
Coded heart rate transmission reduces interference from other heart rate monitors that are close by. To make sure that the
code search is successful and to ensure trouble-free heart rate monitoring, keep the cycling computer within 1 meter/
3 feet of your transmitter. Check that you are not near other people with heart rate monitors or any source of electromagnetic
disturbance. For further information on interference, see Precautions on page 53.
To measure your heart rate, you need to wear the transmitter.
1.
2.
1. Attach one end of the
transmitter to the elastic
strap.
2. Adjust the strap length to fi t
snugly and comfortably.
Secure the strap around your
chest, just below the chest
muscles, and buckle the
strap to the transmitter.
3.
4.
See the following chapter for how to start measuring your
heart rate.
3. Lift the transmitter off your
chest and moisten the two
grooved electrode areas on
the back.
4. Check that the wet electrode
areas are fi rmly against your
skin and that the Polar logo
is in a central, upright
position.
ENGLISH
–
15
Advertisement
Table of Contents
