Turning Off The Power - Hitachi CP-X385W User Manual

TURNING OFF THE POWER

STANDBY/ON
LASER
VIDEO
AUTO
MENU
ENTER
POSITION
ASPECT FREEZE
MAGNIFY
ON OFF
Control panel
NOTE
• Except in
emergencies, follow
the above-
mentioned
procedure for
turning power off.
16
Press the STANDBY/ON button (control
1
panel or remote control)
BLANK
The message "Power off?" will appear on the screen for approximately 5 seconds.
RGB
Press the STANDBY/ON button again
2
(control panel or remote control)
Press the STANDBY/ON button again while the "Power off?"
message is visible. The projector lamp goes off and starts cooling
down. The POWER indicator blinks orange while the lamp cools
KEYSTONE
down. (Pressing the STANDBY/ON button while the POWER
indicator is blinking orange has no effect.)
The system goes into the STANDBY mode after cooling
RESET
down and the POWER indicator stops blinking
ESC
orange and then lights to solid orange.
MUTE
VOLUME
Check that the POWER indicator stops
3
blinking and lights to solid orange.
Switch the power switch to [O] (OFF).
Confirm that the POWER indicator has
4
gone off and then attach the lens cap.
When the projector has completed powering down, the
POWER indicator will go off.
STANDBY/ON
POWER-indikator
på/av-bryter
STANDBY/ON