Table of Contents
Advertisement
TURNING ON THE POWER
Precautions
Connect all devices to be used to the projector prior to turning on the power.
WARNING When the power is ON, a strong light is emitted. Do not look into the
lens.
STANDBY/ON
LASER
VIDEO
Control panel
NOTE
Turn the
power on/off in
right order.
• Power on the
projector before the
computer or video
tape recorder.
• Power off the
projector after the
computer or video
tape recorder.
14
Make sure that the power cord is firmly and
1
BLANK
correctly connected to the projector and outlet
RGB
Turn on the projector's power
2
Set the power switch to [ | ] (ON). The projector will go
to STANDBY mode and the POWER indicator will light to
solid orange.
Press the STANDBY/ON button (control
3
panel or remote control)
• The projector begins warming up and the POWER
indicator blinks green.
• The POWER indicator stops blinking and
lights to solid green once the projector's
power is completely on.
Remove the lens cap
4
The picture is projected.
3
POWER-indikator
på/av-bryter
∼
8
12
STANDBY/ON
Advertisement
Table of Contents
