Table of Contents
Advertisement
Checking the Configuration
Checking the Configuration
After configuring the new interface, use the show commands to display the status of the new interface
or all interfaces, and use the ping and loopback commands to check connectivity. This section includes
the following subsections:
•
•
•
Using show Commands to Verify the New Interface Status
Table 4-4
and operating correctly and that the PA-5EFL appears in them correctly. Sample displays of the output
of selected show commands appear in the sections that follow. For complete command descriptions and
examples, refer to the publications listed in the
Note
The outputs that appear in this document may not match the output you receive when running these
commands. The outputs in this document are examples only.
Table 4-4
Using show Commands
Command
show version or
show hardware
show controllers
show diag slot
show interfaces type 1/
interface-port-number
show interfaces type 4/
interface-port-number
show interfaces type
port-adapter-slot-number/
interface-port- number
PA-5EFL Ethernet 10Base-FL Port Adapter Installation and Configuration
4-8
Using show Commands to Verify the New Interface Status, page 4-8
Using the ping Command to Verify Network Connectivity, page 4-19
Using loopback Commands, page 4-19
demonstrates how you can use the show commands to verify that new interfaces are configured
Function
Displays system hardware
configuration, the number of each
interface type installed, Cisco IOS
software version, names and sources
of configuration files, and boot images
Displays all the current interface
processors and their interfaces
Displays types of port adapters
installed in your system and
information about a specific
port adapter slot, interface processor
slot, or chassis slot
Displays status information about a
specific type of interface (for example,
ethernet) in a Cisco 7120 series router
Displays status information about a
specific type of interface (for example,
ethernet) in a Cisco 7140 series router
Displays status information about a
specific type of interface (for example,
ethernet) in a Cisco 7200 series router
Chapter 4
Configuring the PA-5EFL Port Adapter
"Related Documentation" section on page
Example
Router# show version
Router# show controllers
Router# show diag 2
Router# show interfaces ethernet
1/1
Router# show interfaces ethernet
4/1
Router# show interfaces ethernet
1/0
vi.
OL-3495-02
Advertisement
Table of Contents
