Date And Time; Hold; Main Menu - ClimateMaster ATC32U01 iGate User Manual

AT C 3 2 U 0 1 C o m m u n i c a t i n g , P r o g r a m m a b l e T h e r m o s t a t - U s e r M a n u a l
C r e a t e d : 8 M a y, 2 0 1 2

5.0 Main Menu

Access main menu by selecting MENU on the main screen.

5.1 DATE AND TIME

The thermostat can be programmed for daylight savings, date
and time, and to display date and time on the main screen.
5.1.1 AUTO DAYLIGHT SAVING
When enabled, the thermostat automatically adjusts
the time for daylight savings time.
5.1.2 SET DATE AND TIME
To set the current date and time, use the up/down
arrow buttons. Press the center button to save
changes.
5.1.3 DISPLAY DATE AND TIME
When enabled, the thermostat will display the date and
time (section 5.1.2) on the top line of the Main screen.
NOTE: When the thermostat is confi gured for non
programmable mode by installer the Display Date and
Time setting defaults to NO.
Section 5.2 and 5.3 will not be displayed if the
thermostat is set as "non-programmable" in installer
settings (contact your dealer to change).
5.2 HOLD (Temperature)
The thermostat can be programmed to hold the temperature
and override the program schedule for a set time. The
thermostat can accommodate any hold schedule, whether the
temperature hold is desired for a few hours or a few weeks.
NOTE 1: The thermostat must be in any mode other than
OFF (section 2) to set a vacation/permanent hold.
NOTE 2: The thermostat must be confi gured for
programmable mode by installer) to access the
Hold modes.
5.2.1 VACATION (Hold)
This feature can suspend the program schedule by
using specifi ed heating/cooling setpoints for extended
periods of time.
5.2.1.1 HOLD TEMPERATURE
Set the Vacation Hold heating/cooling setpoints.
The Vacation Hold Temperature Display Mode
shows either one (in Heat, Cool, or Emergency
Heat modes) or both (in Auto mode) temperature
setpoints. Adjust the setpoints using the up/down
arrow buttons. Navigate between setpoints using
the left/right arrow buttons. Press the center
button to save changes.
6
G e o t h e r m a l H e a t P u m p S y s t e m s
10/13/11 8:27 AM
FAN AUTO
RH 40%
°
69
OFF
MENU
RH MODE FAN
TEMP
MAIN MENU
SET DATE AND TIME

HOLD

PROGRAM
FAN
MODE
SETTINGS
SECURITY LOCKOUT
MAIN MENU
SET DATE AND TIME
HOLD
PROGRAM
FAN
MODE
SETTINGS
SECURITY LOCKOUT
HOLD MENU
VACATION
PERMANENT
SELECT OPTION
PREVIOUS