Reset Connector; Flash Eprom Jumpers; Cmos & Password Reset - TYAN S1570 AT User Manual

Refer to chapter 5 for Flash EPROM upgrade procedures.
3.9 Hardware CMOS & Password Reset: JP38
If you have been locked out of your system because you forgot your pass-
word or set the CMOS incorrectly, follow the instructions below.
a. Power off the system
b. Jumper JP38 to pins2 and 3.
c. Wait for 2 seconds then return the jumper to pins 1 and 2.
d.Power on the system again.
By doing the above procedures, your password will be erased and the CMOS
will be reset to the BIOS defaults.
S1570-001-01 http://www.tyan.com 14