Whiteboard Connection; Usb Connection; Rf Wireless Connection - Qomo Interactive Whiteboard Owner's Manual

Whiteboard Connection

There are two connection ways of whiteboard: USB connection, and RF wireless
connection, please select your connection way based on whiteboard model you
purchased.

USB connection

Step 1: Setup whiteboard.
Step 2: Adjust the position of projector and whiteboard.
Step 3: There is USB port on connection box at the lower right corner of whiteboard, plug
one end of USB cable to this USB port.
Step 4: Plug another end of USB cable to host computer's USB port.
Step 5: Connect computer and projector (refer to projector's user's manual).
USB connection figure

RF wireless connection

Step 1: Setup whiteboard and adjust the position of projector and whiteboard.
Step 2: Connect 5V power adapter to electromagnetic whiteboard.
Step 3: Plug wireless receiver to host computer's USB port.
—18—