The product net weight is as heavy as 15 kilos. Please use expansion screw for stable fixation to ensure the safety. Don’t stare at the light from projector for a long time, especially for the children. This manual is only available for QOMO IR interactive whiteboard. Plastic pens or Qpen optional provided by QOMO are available to use with whiteboard. The product adopts infrared positioning technology. Keep the whiteboard away from external hard objects’ squeezing to avoid deformation. ...
System Requirement The Lowest Hardware Requirement: CPU: 1.0GHz×86 Memory: 256M or above Display card: support 256 colors Hard disk: 1G Support resolutions: 800×600, 1024×768, 1280×1024 USB1.1 port Configuration Recommended: CPU: 2.0GHz×86 Memory: 512M or above Display card: support 256 colors Hard disk: 2G Support resolutions: 1024×768, 1280×1024 USB2.0 port Operation System: Microsoft Windows XP/7/8.1/10 (32bit or 64bit) 3 ...
Product Introduction QOMO’s Interactive Whiteboard uses infrared technology. Working seamlessly with a projector and computer, the QOMO Interactive Whiteboard provides more convenient, interactive and effective presentations. Perfect for school auditoriums, conference rooms, trade shows, symposiums and lecture halls. Users can write on the screen using the included pens, wand or the user’s finger. Writing: Write, draw and perform mouse functions with your finger. The ...
Page 6
1. Set four holes on the wall based on indicated whiteboard size;(Hole size: ø=12mm,Height=60mm) 2. Secure the expansion bolts (M8*60mm) into the four holes and use nuts to tighten firmly into wall; (Keep nuts 5mm with Spring Washer) 3. Align the Wall‐mounting Brackets onto the bolts; make sure the Wall‐mounting Bracket holes should be fixed between the Spring Washer and and nuts. 4. Check and screw the nuts. Interactive System Construction 1. Make sure the whiteboard has been well fixed before interactive system construction. 2. Adjust the corresponding position between projector and whiteboard so that the entire image projected is within the whiteboard writing area. 3. Connect the USB cable into the whiteboard USB port. Make sure to use the USB cable in the box instead of others. 4. Connect the other end of USB cable computer USB interface. 5. Connect computer with projector. 6 ...
Calibration Whiteboard Calibration Flow!Works Server Pro appears at the lower right of taskbar after drive 1. installation (as figure 1). Left‐click Flow!Works Server Pro and proceed to main drive interface (as figure 2). (Figure 1) 7 ...
Page 8
(Figure 2) . Click “Calibrate” button to pop up calibration interface (as figure 3); Click and hold the center of the cross. Complete the calibration process as instructed. (Figure 3) 3. Confirmation interface pops up after positioning. Click “Yes” after it completes (as figure 4) 8 ...
(Figure 4) Hot Key Calibration Flow!Works Pro server offers two kinds of hotkeys calibration, either 12 keys calibration together or separately is accepted. Calibration together 1. Click “Hotkey Settings” button to enter into the hotkey calibration window (as figure 5). 9 ...
Page 10
(Figure 5) 2. Choose “Calibrate Altogether” and click “Calibrate” button to enter into hotkey calibration interface. Tap corresponding position according to the red arrow’s point (as figure 6). (Figure 6) 10 ...
Page 11
3. Hotkey calibration in real environment reference (as figure 7). (Figure 7) 4. Click “Yes” to save when confirmation window pops up after it completes (as figure 8). (Figure 8) Calibrate Separately 1. Choose “Calibrate Separately” and click every single “Calibrate” button back of the hotkeys (as figure 9). 11 ...
(Figure 9) 2. Every single hotkey calibration reference (as figure 10). (Figure 10) Hints & Tips To ensure the writing accuracy, use the pen provided rather than a finger to 12 ...
perform calibration. Calibration errors may cause touch functions failure. In that case, please perform calibration again. Tap “ESC” on the keyboard to cancel the current positioning process. The calibration interface varies for different software versions. But calibration way is similar. Hotkey calibration fit for whiteboard with hotkeys. Please follow the instructions to calibrate. Whiteboard Use Whiteboard can work normally after calibration, even without opening Flow!Works Pro. Some common operations can be implemented rapidly through whiteboard. Click Use pen or finger to control the cursor position on the whiteboard to achieve mouse left key click function. It is generally used to select or point to objects. Double‐click Double click with pen or finger on the whiteboard to achieve mouse double‐click function. Double click the Flow!Works Pro icon on the desk to start the software. Right Click ...
Hold finger or pen on the whiteboard for about 2S to achieve mouse right click function. Trouble Shooting Trouble Shooting Failure Phenomenon/Feature Possible Cause Solution Whiteboard fails Flow!Works Server is Flow!Works Server was not Start the Server. to work not running. started. Flow!Works Server was not Install the Server. ...
Unable to write Mouse cursor is Software is not in writing Switch to the writing mode moving while there’s mode. and the mouse cursor icon no handwriting. shows pen. Mouse cursor icon The pen stroke color are Change pen stroke color or shows pen but fail to the same as or similar to background. write in writing mode. the background color. Writing accuracy Large deviation at Inaccurate positioning. Re‐positioning. deviation some parts of the Projective distortion Adjust projector. whiteboard. The writing Conflict with antivirus Close the antivirus software. delayed software. Too many programs are Shut down programs not running at the same time. used for the moment. Hardware configuration is Upgrade hardware ...
Electronic Feature: Power Supply Mode: USB; Supply Voltage: DC+5V±5%; Operating Current: <200mA. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide ...
Page 17
Notes: 1. Please keep this manual for future reference. 2. This manual is available for all series of infrared whiteboard so there may be some differences between the actual product and the product explained in this manual. 17 ...