Fm Presets - XM EDGE User Manual

Using Your Edge
Scanning Channels in a Category
You can scan a category and listen to each channel for 10 seconds before Edge
automatically tunes to the next channel . If you want to stay tuned to the channel
being played and stop the scan, just press the Select button .
To scan a category:
1 Press or until the desired category is displayed .
2 Scroll down to highlight the last item in the category which will be Scan
and the category name .
3 Press the Select button . The scan will begin .
4 Press the Select button to stop the scan, and to continue to listen to the
channel currently being played, or turn the Rotary Knob to return to the
channel you were listening to before you began the scan .
58

FM Presets

FM presets make it easy to quickly access stored FM channels and choose a new FM
channel from them .
Use FM presets when you use PowerConnect or the FMDA to listen to your Edge
through your vehicle's FM radio . (Refer to "Option 3: PowerConnect Installation
Instructions" on page 43 for more information .)
To use a different FM preset:
1 Press FM to display the current
FM preset .
2 To display and select the next FM
preset, press FM . The Radio will tune
to the displayed FM channel . If the
preset is the one you want, press menu
or wait for the screen to time-out .
3 Repeatedly pressing FM will cycle
through the FM presets .
4 Set your vehicle's FM radio to the
same FM channel .
IMPORTANT! You need to ensure that
your vehicle's FM radio is tuned to the
same FM channel .
TIP! To configure the list of preset FM
channels, you need to find available FM
channels in your area . Refer to"Find
Available FM Channels in Your Area" on
page 73 . Next, refer to "Set and Select an FM Channel" on page 75 .
59