Step 5: Turning On Your Xmp3 Radio; Find An Fm Frequency - XM XMp3 Installation Manual

Vehicle Installation
• XM SureConnect (sold separately): You can listen to your XMp3 radio through your
car stereo by using the XMp3 car cradle's built-in FM modulator and the XM
SureConnect. Simply fi nd an unused FM frequency on the stereo and set your XMp3
radio to transmit on that same frequency. Refer to Find an FM frequency in your user
guide for more information.
• FM Direct (sold separately): This option directly connects the XMp3 car
cradle to your car's audio system and antenna. A professional installation is
recommended if you choose to use this method. Professional installation can help
improve your XMp3 radio's reception and signifi cantly reduce the visibility of wires.
To learn more, check with the retailer where you bought your radio or go to
xmradio.ca/accessories

Step 5: Turning on your XMp3 radio.

1 1
Turn on your car radio.
2 2 Plug in the audio cable or insert the cassette adapter into your car stereo if
applicable.
3 3 Turn on your XMp3 radio.
NOTE: You may experience a brief delay while your XMp3 radio powers up. If you press
the power button during this time, you will see a "Please Wait" message.
14

Find an FM frequency

(When using the XM SureConnect or FM Direct.)
If you are using the SureConnect or FM Direct to transmit audio, you must set the
FM frequency on both your XMp3 radio and your car radio.
1 1 Select menu → Settings → Vehicle Settings → Frequency Finder.
2 2 Your XMp3 radio automatically scans for all available FM frequencies.
15