XM EDGE User Manual page 29

Using Your Edge
Direct Tune
A channel can be tuned directly by entering
the channel number using the number buttons .
1 To directly tune to a channel press # .
2 Use the number buttons 0-9 to enter
the channel number and wait a moment
until the channel is tuned, or press the
Select button to immediately tune to
the channel .
Jump
Depending upon how you configure the mode, pressing jump will either tune to
the traffic and weather channel for the city of your choice which you select from
a list of the 22 most congested cities, or tune to the last channel to which you
were listening .
TIP! By default jump is configured to tune to a traffic/weather channel . To select
a city for traffic and weather, or to configure jump to tune to the last channel to
which you were listening, refer to "Jump Settings" on page 79 .
Return to Main Display Screen
Pressing and holding menu in most instances will return you to the main display
screen . In some cases, you may need to follow the instructions on the display
screen .
56
Favourite Channels
You can set up to 10 of your favourite channels so you can easily access them .
Each favourite channel can be assigned to a number button .
To assign a favourite channel to a number button:
1 Tune to the desired channel .
2 Press and hold a number button between
0-9 that you want to assign to that
favourite channel . An advisory with
the channel number and name will be
displayed on the screen confirming that
the channel has been assigned .
To listen to a favourite channel:
1 Press the number button between 0-9 that was assigned to the desired
favourite channel . Edge will tune to that channel .
TIP! When you are at the main display screen, press
favourite channels . Scroll to highlight a favourite and press the Select button to
listen to that channel .
to see your list of
57