Disarming Alarm Activates Lights For 30 Or 60 Seconds - Omega Research & Development K9-FIVEc Owner's Manual

Disarming Alarm Activates Lights
(Selected From Learning Code Feature #3:) Alarm comes with this feature turned "On".
With Feature #3 In The "ON" Position: Lights are programmed to turn on for 60 seconds after you
disarm the alarm with the following exceptions: (1) Lights turn off 10 seconds after a door is opened,
and (2) lights turn off instantly when ignition is turned on.
With Feature #3 In The "OFF" Position: Lights are programmed to turn on for 30 seconds after
you disarm the alarm with the following exceptions: (1) Lights turn off 10 seconds after a door is
opened, and (2) lights turn off instantly when ignition is turned on.
By Following steps 1, 2, and 3 on page 16, you will be in the feature programming mode. To turn
"on" or "off" feature #3, follow the steps below:
TM
Step #4: Press the Easy Valet button switch 3 times and the siren will chirp 3 times to confirm that
you are in feature #3 program. You now have 10 seconds to start step #5.
Step #5: Within the next 10 seconds, turn feature #3 "on" or "off":
Turning "on" feature #3: Press the large transmitter button. The siren will chirp once to
confirm feature #3 was turned on.
Turning "off" feature #3: Press the small transmitter button. The siren will chirp twice to
confirm feature #3 is turned "off"
Note: If you keep turning feature #3 on and off, programming activity will be extended.
10 seconds without any programming activity, the system will exit the programming mode
Step #6: To turn "on" or "off" another feature number, repeat steps #4 and #5 within 10 seconds.
Step #7: To exit this program at anytime, Turn on ignition, or have 10 seconds of no program activity.
Exiting this program is confirmed by one long warbling chirp.
For 30 Or 60 Seconds
Page
- 26
90-Second Re-arming After Accidental Disarming
(Selected From Learning Code Feature #4): Alarm comes with this feature turned "On".
With Feature #4 In The "ON" Position: Once the transmitter has armed the alarm, feature #4
programs the alarm to stay armed until the owner gets back. If the alarm is accidentally disarmed from
the transmitter, the alarm will automatically re-arm & lock the doors 90 seconds after each time the
alarm is disarmed from the transmitter or until a vehicle door is opened or the ignition is turned on.
Note: When Automatic Last Door Arming is turned "on" from the uncut Green loop wire, this
feature #4 will work automatically.
By Following steps 1, 2, and 3 on page 16, you will be in the feature programming mode. To turn
"on" or "off" feature #4, follow the steps below:
TM
Step #4: Press the Easy Valet button switch 4 times and the siren will chirp 4 times to confirm that
you are in feature #1 program. You now have 10 seconds to start step #5.
Step #5: Within the next 10 seconds, turn feature #4 "on" or "off":
Turning "on" feature #1: Press the large transmitter. The siren will chirp once to confirm
feature #4 was turned on.
Turning "off" feature #1: Press the small transmitter button. The siren will chirp twice to
confirm feature #4 is turned "off"
Note: If you keep turning feature #4 "on" and "off", programming activity will be extended.
10 seconds without any programming activity, the system will exit the programming mode
Step #6: To turn "on" or "off" another feature number, repeat steps #4 and #5 within 10 seconds.
Step #7: To exit this program at anytime, Turn on ignition, or have 10 seconds of no program activity.
Exiting this program is confirmed by one long warbling chirp.
NOTE: Feature #5 is not used at this time.
Page - 27