Table of Contents
Advertisement
h5297 6" Welding Fume Collection Kit
our starter kit includes everything you will need
for a simple, single machine set up at one low
price. the branch and end cap makes your fume
extraction system expansion ready for future
growth. the an addition kit will allow you to
expand as your shop gets bigger.
• 2 machine adapters
• 10 pipe clamps
• 3 6' pipes
• 1 branch
• 3 pipe hangers
Figure 15. Model h5297 welding fume
collection kit.
h7217—Rigid Flex hose
this rigid Flex hose with rolled collars provides
just
enough
flexibility
connections while still keeping the inside wall as
smooth as possible. 6" diameter and 5 feet long.
Figure 16. Model h7217 rigid flex hose.
g0648 Welding Fume Extractor
• 1 end cap
• 3 adjustable nipples
• 1 90° elbow
• 1 60° elbow
to
make
difficult
Steel 6" Elbows
5 styles of 6" diameter elbows give you the
versatility to create just about any duct run. Well
made and intended for tough use.
g7366 6" 30° Elbow.
g7367 6" 45° Elbow.
g7368 6" 60° Elbow.
g7369 6" 90° Short Elbow.
g7370 6" 90° long Elbow.
G7366 6" 30°
G7367 6" 45°
G7369 6" 90°
Figure 17. Steel elbows.
G0650—Welding Downdraft Table
this 37" wide x 22" long downdraft table is
designed to collect welding/grinding sparks, slag,
and dust during welding and cutting operations.
When connected to the grizzly g0648 Welding
Fume Collector, both overhead and lower fume
collection suction can be used.
Figure 18. g0650 Welding downdraft table.
G7368 6" 60°
G7370 6" 90°
-23-
Advertisement
Table of Contents
