Table of Contents
Advertisement
6.2
Familiarizing the Buttons in Remote Console
Name
(1) DirectDraw
i
Direct Draw function supports for certain VGA card. For more information, please contact your VGA card
vendor.
(2) Exit
(3) Audio button
(4) Split Screen Mode
(5) Record
(6) Emap
(7) Network
(8) Setup
(9) PTZ
(10) Preview
(11) Playback
(12) Status Bar
(13) Camera ID
(14) Snapshot
Function
Enhance the video quality.
Close the Remote Console.
Enable/disable the sound.
Select from four(4) different split screen type to playback the recorded video file of all the
camera, or one camera over the other or alongside on a single screen. If there are only 8
cameras, you won't be able to switch to 13 and 16 split screen mode.
Start/stop video recording.
Call out Emap of remote DVR to view.
Enable/disable remote system access. This feature allows you to access DVR server from
a remote location via internet connection.
Configure the Remote Console setting. (see also
To select PTZ camera.
Switch to Preview/Playback mode. This allows you to view live camera display.
Switch to Playback mode. This allows you to view the recorded video file. (see also
Chapter
6.4)
Display the current date, time and hard disk free space.
Show the number of cameras that are being viewed. When you are in single screen mode,
click the camera ID number to switch and view other camera.
Capture and save the screen shot either in *.jpg or *.bmp format.
Chapter
98
6.2.1)
Advertisement
Table of Contents
