Oki C610 User Manual page 31

ITEM
Network Gateway
Setup Address
(cont.)
Web
Telnet
FTP
IPSec
SNMP
Network
Scale
Hub Link
Setting
Factory
Defaults?
Print Setup Personality
Copies
Duplex
SETTINGS EXPLANATION
xxx.xxx.xxx.xxx Sets the Gateway (default router) address.
0.0.0.0 means that there is no router.
Display Conditions:
> TCP/IP should be enabled.
> IP Version is not IPv6.
Enable Sets Enable/Disable of Web.
Disable Enable: Web/IPP is available.
Disable: Web/IPP is not available.
Display Condition: TCP/IP should be enabled.
Enable Sets Enable/Disable of Telnet.
Disable Enable: Telnet is available.
Disable: Telnet is not available.
Display Condition: TCP/IP should be enabled.
Enable Sets Enable/Disable of FTP.
Disable Enable: FTP is available.
Disable: FTP is not available.
Display Condition: TCP/IP should be enabled.
Enable Sets Enable/Disable of IPSec. Enable via the web.
Disable Enable: IPSec is available.
Disable: IPSec is not available.
Enable Sets Enable/Disable of SNMP.
Disable Enable: SNMP is available.
Disable: SNMP is not available.
Display Condition: TCP/IP or NetWare should be enabled.
Normal When Normal is selected, the network can work
effectively even when it is connected to a HUB that has a
Small
spanning tree feature. However, printer start up time gets
longer when computers are connected with two or three
small LANs.
When Small is selected, computers can cover from two or
three small LANs to a large LAN, but may not work
effectively when the network is connected to a HUB with a
spanning tree feature.
Auto Negotiate Sets a method to link to a HUB. When Auto is set, a
connection method to a HUB is selected automatically and
100Base-TX Full
attempts to connect.
100Base-TX Half
If another method is selected, attempts to connect to a
10Base-T Full
HUB only by the selected connection method.
10Base-T Half
Execute Specifies whether to initialize the network factory default
settings for the Network.
Auto Selects a printer language.
PostScript
PCL
XPS
IBM PPR
EPSON FX
1- 999 Selects the number of copies.
This setting is disabled for Local Print except for Demo
Page.
On/Off Specifies duplex print (option) if a duplex unit is installed
and enabled
Menu functions > 31