Recognition Systems HandKey II Installation And Operation Manual page 73

HandKey II Installation and Operation Manual
7. As prompted, repeat Step 5 twice so that 3 quality hand reads can be recorded by
the Hand Reader. Once the third read is complete the User Enrolled message
appears on the display.
In some cases the Hand Reader may require more than 3 hand reads. If this is the case,
NOTE
simply repeat Step 5 as requested until the User Enrolled message appears on the
display.
8. After a short delay the Add User option reappears on the display.
9. Press
– or –
10. Press
– or –
11. Press
Revision 2.0
123
USER ENROLLED
ADD USER
*NO YES#
5
to exit command mode.
#
to enroll another user. Repeat this procedure beginning at Step 3.
*
to step to the Remove User command.
Page 73