Set Print Options - Recognition Systems HandKey II Installation And Operation Manual

HandKey II Installation and Operation Manual

Set Print Options

Set the Print Options to whether or not the serial printer should print valid access
events.
1. When you enter the Set Print Options command the display appears as follows.
2. Press
– or –
3. Press
command.
– or –
4. Press
display.
5. Press
– or –
6. Press
7. The display returns to the start of the Set Print Options command.
8. Press
– or –
9. Press
Page 114
PRINT OPTIONS
*NO YES#
5
to exit the command menu.
*
to keep the current print options setting and skip to the Set Beeper
#
to Set the Print Options. The Print Valid Access option appears on the
VALID ACCESS
*NO YES#
*
to not Print Valid Access events.
#
to Print Valid Access events.
PRINT OPTIONS
*NO YES#
*
to step to the Set Beeper command.
5
to exit command mode.
Revision 2.0