Table Of Contents - Recognition Systems HandKey II Installation And Operation Manual

HandKey II Installation and Operation Manual
Introduction 7
HandKey II 7
Biometrics 7
Principle of Operation 7
The HandKey II Reader 7
Specifications 10
Planning an Installation 13
Site Preparation 13
Hand Reader Placement 13
Wiring 14
Power Input 14
Grounding 14
Battery Backup Operation 15
Door Control Output 16
Lock Output Mode 16
Card Reader Emulation Mode 16
Inputs and Outputs 17
Networking and Communications 18
Stand-alone Hand Reader 18
Master or Remote Hand Reader in a Hand Reader Network 18
Remote Hand Reader in a Hand Reader Network Connected to a Host PC 19
Remote Hand Reader Connected to a Host PC via Optional Modem 20
Remote Hand Reader Connected to a Host PC via Optional Ethernet 20
Printer 20
Mechanical Installation 21
Wall Plate Installation 21
Wall Preparation 21
Mounting the Wall Plate 22
Routing the Wiring 22
Attaching the Hand Reader 22
Wiring Connections 24
Wiring Examples 24
Setting the DIP Switches 33
End of Line Termination 34
Communication Method 35
Erasing Hand Reader Memory 35
Erasing the Hand Reader Setup 35
Erasing the Hand Reader Setup and User Database 35
Closing the Hand Reader 36
Powering the Hand Reader 36
Revision 2.0

Table of Contents

Page 3