Table of Contents
Advertisement
TROUBLESHOOTING GUIDE
PROBLEM
10.
Motor will not start.
(Continued)
11.
Motor stops.
12.
Air Blower does not operate.
13.
Accessory Switch and system
switch in OFF position, but
motor and heater still
operating.
14.
Timer will not activate spa.
* Note: The skills and tools necessary for the safe repair of this spa require the services of qualified service personnel.
Contact your Jacuzzi Whirlpool Bath Authorized Service Agent or Dealer.
PROBABLE CAUSE
G.
Subnormal voltage.
H.
Improper or defective wiring.
I.
Locked shaft or impeller.
J.
Motor windings burned out.
K.
Defective starting switch
inside motor.
A.
Motor overload condition.
B.
High temperature safety
switch tripped.
C.
Selector switch failure.
D.
Relay failure.
E.
Inadequate supply wiring.
A. Power off.
B. ACCESSORY switch is OFF.
C. House circuit breaker tripped,
no power to system.
D.
GFCI tripped.
E.
Faulty motor.
A. Timer is functioning.
A. SYSTEM switch is not in
OFF position.
B.
SYSTEM switch is in
HTR/FLTR position and spa is at
temperature set on thermostat.
C. Timer failure.
REMEDY
G. Call and electrician or your
power company.
H. *
I.
*
J.
*
K. *
A. Let cool for one hour. Motor
overload will reset; if problem
persists, see *Note.
B.
Reset button on heater after
water has cooled; see *Note if
switch continues to trip.
C. *
D. *
E. Consult electrician to correct
wiring to unit.
A. Turn on power at service panel.
B. Select other function.
C. Reset circuit breaker.
D. Reset GFCI.
E.
*
A. Normal function, Turn timer to
an OFF position, or reset tabs
in off position.
A. Turn SYSTEM switch to
OFF position.
B.
Turn SYSTEM switch to OFF posi-
tion, or turn HEATER control
down. (If thermostat is already at
minimum setting, and spa is at
or above that temperature, timer
will not operate.)
C. *
19
Hide quick links:
Advertisement
Table of Contents
