Controls - Jacuzzi THE SANTINA Owner's Manual

Controls

The contrtol panel giving you convenient control of the
jets, filter, heater/filter, blower and light is located on the spa
rim.
To ensure your safety and allow easy operation, your spa
is equipped with two air-activated switches. One, the
SYSTEM switch, controls the whirlpool jets, heat, and
filtration. The other switch, ACCESSORY, controls the
blower system and optional light.
System
The SYSTEM switch controls the following four functions
in the continuous sequence indicated:
1. OFF
2. JETS
3. HTR/FILTER
4. FILTER
(The next selection is OFF again)
Use the JETS function as a reference to indicate your
location in the function sequence, since that function is the
most obvious when operating.
For best performance and increased equipment life,
pause a second or two between pushbutton selections.
CONTROL PANEL
ACCESSORY SWITCH
(Controls AIR Blower and
LIGHT functions.)
OPERATION
Accessory
The ACCESSORY switch controls these functions in this
sequence:
(The next selection is OFF again)
SYSTEM SWITCH
(Controls JETS, HTR/FLTR
and FILTER only functions.)
1. OFF
2. AIR
3. AIR/LIGHT
4. LIGHT
TEMP. CONTROL KNOB
(For adjusting thermostat)
HEATER
INDICATOR
LIGHT
9