Setup; Fuse Replacement; Replacing Gobos - Chauvet Q-Spot 150-LED User Manual

3. S
ETUP

Fuse Replacement

1) With a flat head screwdriver wedge the fuse holder
out of its housing.
2) Remove the damaged fuse from its holder and
replace with exact same type and rating fuse.
3) Insert the fuse holder back in its place.
4) Reconnect power.

Replacing Gobos

1) Remove the gobo cover.
2) Remove the slot-n-lock gobo from the gobo wheel.
3) Using a small tool, pry the tension ring from the gobo holder.
4) Remove the old gobo.
5) Insert the new gobo, and replace in the
reverse steps of removal.
Q-Spot™ 150-LED User Manual
Disconnect the power cord before replacing a fuse and always
replace with the same type fuse.
8
9/22/2009 3:57 PM