Table of Contents
Advertisement
Color Splash
®
Available in 120VAC and 12VAC models
Color Splash LED Pool and Spa light fixtures offer superior, color illumination for
your pool and spa. This owner's manual contains important information on installing
and using your new Color Splash LED Pool and Spa light fixture. Read and follow all
instructions contained in this manual. Please keep it in a safe place for future reference.
COLOR SPLASH LED POOL AND SPA LIGHT FIXTURE NICHE COMPATIBILITY
For LPL-F1C ONLY
Pentair®: 78210400, 78210500,
78210600, 78210700, 79206700
Hayward®: SP0604C, SP0600U
Jandy®: PLNICLRG, SSNICLRG1R,
SSNICLRG1S
Jacuzzi®: 94131234
DANGER!
RESULT IN SERIOUS BODILY INJURY OR DEATH.
WARNING! Comply with all related codes for the installation and
use of this product.
Most states and local codes regulate the construction, installation, and operation of
public pools and spas, and the construction of residential pools and spas. It is important
to comply with these codes, many of which directly regulate the installation and use
of this product. Consult your local building and health codes for more information.
INSTALLER NOTICE: This Installation and Operation Guide contains important
information about this LED light. Be sure to give this guide to the owner and/or
operator of the LED light for reference regarding the proper installation, operation
and use of this product.
WARNING! Before installing or using this light, read all warnings and
instructions contained in this manual.
Read and follow all warning notices and instructions contained in this guide before
installing or using the product. Severe injury, death or property damage may result if
the warnings and instructions contained in this manual are not followed.
pg 1
LED POOL AND SPA LIGHT FIXTURES
FAILURE TO PROPERLY INSTALL AND USE THIS PRODUCT CAN
For LPL-S1C ONLY
Pentair®: 78244200, 78244300, 78243200,
78243300, 79206600
Hayward®: SP0606C, SP0610C
Jandy®: PLNICSM, SSNICSM1R, SSNICSM1S
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Color Splash and is the answer not in the manual?
Questions and answers
Pool light and spa light don’t match. Now spa light out. Pool light working perfectly.
The J&J Electronics Color Splash pool and spa lights may not match if they are not on the same electrical circuit. The lights are “synchronous,” meaning they will display the same light shows only when connected to the same circuit.
The spa light may not be working due to improper installation, power not being switched “on” at the circuit breaker or light switch, or failure to follow correct wiring procedures. It is also important to ensure the light is submerged in water during operation, as running it dry can cause the light to shut down or become damaged.
This answer is automatically generated