Table of Contents
Advertisement
3. DESERT BLOOM
Show: Very slow cross-fade through all seven solid colors.
Cycle: Seventy-seven minute color sequence cycle with super slow cross-fade between
solid colors. Fixture will stay on each solid color for 10 minutes before moving to the
next.
4. PATRIOT DREAM
Show: Quick cross-fade through red, white and blue only.
Cycle: 11 second cycle through red, white and blue with quick cross-fade between
colors. Fixture will stay on each solid color for 3 seconds before moving to the next..
5. TIDAL WAVE
Show: Slow cross-fade between green and blue.
Cycle: 24 second cycle through green and blue with slow cross-fade between solid
colors.
(TIP: The Northern Lights show is the best show to use in order to practice using the Color
Lock feature of the fixture.)
PROBLEM
The light fixture will not illuminate
Light fixture does not function properly
TROUBLESHOOTING
REASON/CAUSE
Check the GCFI ground fault wiring and
reset if necessary
Check the fixture wiring connection to
the junction box at the pool side and
the AC power swtich.
Be sure that there is proper AC power
applied to the fixture.
pg 10
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Color Splash and is the answer not in the manual?
Questions and answers
Pool light and spa light don’t match. Now spa light out. Pool light working perfectly.
The J&J Electronics Color Splash pool and spa lights may not match if they are not on the same electrical circuit. The lights are “synchronous,” meaning they will display the same light shows only when connected to the same circuit.
The spa light may not be working due to improper installation, power not being switched “on” at the circuit breaker or light switch, or failure to follow correct wiring procedures. It is also important to ensure the light is submerged in water during operation, as running it dry can cause the light to shut down or become damaged.
This answer is automatically generated