Hardware Setup - Belkin Bluetooth Wireless Desktop User Manual

Hardware Setup

USB Adapter
You must connect the
(USB) port on your computer.
NOTE: Your USB Adapter is sensitive to static electricity, which can damage its
delicate electrical components. Electrostatic charges can be acquired simply by dry
weather conditions or they can occur when you walk across carpeted floors. To protect
your device, always touch the metal chassis of your computer before handling the USB
Adapter, or any internal computer component. This will ground a potential electrostatic
discharge. Avoid touching the metal connector when handling the USB Adapter.
There are two ways to connect your USB Adapter:
1.
Connect the USB Adapter directly to an available USB A-type connector on your
desktop or notebook computer.
2.
Connect the USB Adapter to the included USB base stand, and then connect the
other end of the cable to an available USB A-type connector on your desktop or
notebook computer. This is recommended for desktop computers.
Bluetooth
USB Adapter to an available Universal Serial Bus
15
1
2
3
4
5
6
7
8
9
10
11
12