INTRODUCTION Congratulations and thank you for purchasing the Wireless Keyboard and Optical Mouse bundle from Belkin. We appreciate your business and are sure you will enjoy years of reliable use with these high-quality, input devices. Please review this entire User Manual so you can be sure to get the most reliable performance from your new equipment.
USB or PS/2 interface NOTE: Use of these products on a desk made of iron, or other metal, will negatively impact the operation of your Wireless Keyboard and Mouse. Operating Systems Windows ® XP, Me, 2000, 98 SE for USB interface...
2-head connector for the Keyboard and Mouse connections (purple is for the Keyboard and the USB connection; the green is for the Mouse). There is also an illustration on the top connector to identify them. If your computer does not use the same color scheme, match the plug with the illustration next to the port.
New Hardware Wizard with your old keyboard and mouse. 3. Install the batteries into your Keyboard and Mouse. Please make sure you follow the indication on the inside compartment for correct positioning of the batteries.
Belkin software. 1. Be sure your computer is powered on. 2. Insert the CD into your computer’s CD-ROM drive. 3. If you have not previously installed Keyboard and Mouse software, click “OK” and the installation will begin. Follow the on-screen instructions.
USB-PS/2 STANDARD KEYBOARD HOT KEY FUNCTIONS My Documents Launch Microsoft My Document. My Picture Launch Microsoft My Picture (Note: This function does not work in Windows 98.) My Music Launch Microsoft My Music (Note: This function does not work in Windows 98 or 2000.) Play/Pause Start and stop the playback of your audio and video applications.
TROUBLESHOOTING The Keyboard and/or Mouse is/are not detected or do not work after installation. • Make sure the receiver cables are plugged into either the computer’s PS/2 port or a USB port. If you are connecting via PS/2, make sure that both plugs are being used (purple keyboard connection and the USB connection with the green PS/2 adapter).
Page 10
• Make sure you have properly established communication/ synchronization between the receiver and the Mouse and Keyboard. • If the Keyboard and/or Mouse are not working, make sure that the LED on the Keyboard and/or Mouse start flashing when you push any of the Keyboard keys, Mouse buttons, or move the Mouse.
2. Select “Control Panel”. 3. Select “Add/Remove Programs”. 4. Select “Belkin Wireless Driver,” then click on “Add Remove”. 5. You will be asked if you are sure if you want to remove the selected application and all of its components. Click on “Yes”.
CE Declaration of Conformity We, Belkin Corporation, declare under our sole responsibility, that the F8E832-BNDL to which this declaration relates, is in conformity with EN55022, EN61000-3-2, EN61000-3-3, and EN55024. Caution: Exposure to Radio Frequency Radiation.
Page 13
Belkin Corporation warrants this product against defects in materials and workmanship for its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product.
• ETS 300 826 General EMC requirements for radio equipment. To determine the type of transmitter, check the identification label on your Belkin product. Products with the CE marking comply with the EMC Directive (89/336/EEC) and the Low Voltage Directive (72/23/EEC) issued by the Commission of the European Community.
Page 15
Belkin Components warrants this product against defects in materials and workmanship for its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product.
Need help?
Do you have a question about the F8E832-BNDL and is the answer not in the manual?
Questions and answers